How To Make A Watermelon Keg – And The Best Keg Tap Kits

Finding fun and creative ways to serve cocktails at your parties can be tough, but one method that is endlessly versatile, delicious, and super easy is to make a watermelon keg.

Using a watermelon as the serving vessel for your cocktails is a great way to infuse them with fresh flavors. You can use your watermelon keg to serve a refreshing sangria mix, a delicious watermelon lemonade, fruity alcoholic punch, and more.

It’s a great way to infuse flavor into your drinks and add some whimsy to your parties. 

We know it might seem daunting, but if you’ve ever carved a pumpkin then we can virtually guarantee you that you’ll be able to make an excellent watermelon keg. You just have to follow a few key steps. 

So, how do you make a watermelon keg? You’ll want to cut a sliver from the bottom for stability and cut a circle out of the top of your watermelon on an angle. Then, scrape out the flesh inside, leaving a bit around the edge. Cut a hole for the spigot, insert and seal the spigot, and enjoy!

Read on to learn more about making the perfect watermelon keg every time, the 3 best watermelon keg tap kits, and a recipe for a fresh cocktail to serve at your next party. 

How To Make A Watermelon Keg

In order to make a watermelon keg, there are a few steps to follow. Making the keg is a bit like carving a pumpkin, only you’ll want to save all the insides of the watermelon to make delicious, fruity cocktails to serve out of the keg tap. 

You’ll need to have a few tools on hand to help the process run smoothly: 

• A cutting board.
• A long sharp knife to trim the bottom and cut the opening in the top.
• A paring knife or coring tool to cut the hole for the spigot.
• A large, long spoon or scoop to scrape out the inside of the watermelon.
• A large bowl to store the watermelon flesh.
• Some dish towels and rags for clean up. 

Follow these steps to make your perfect watermelon keg to take your party to another level. 

1. Cut a sliver from the bottom for stability.

• First, you want to make sure that your keg is stable and sturdy. To do this, you will want to cut a small sliver from the bottom (don’t go too deep into the rind or it will leak) so that it will stand flat. Take your time to make sure it is flat and even for the best results.

2. Cut a circle out of the top of the watermelon.

• This is where you want to harness your inner pumpkin carver. You want to find a sharp knife and cut a circle out of the top of the watermelon, on an angle like you would with a pumpkin. Cutting the circle on an angle is important to make sure the lid doesn’t fall inside the watermelon. 

3. Scrape out the insides of the watermelon.

• Using a large spoon or pumpkin scraper, you’ll want to scrape out most of the pink flesh inside of the watermelon. Place the scrapings in a bowl to use for your cocktail if you want to make a watermelon flavored treat.
• Make sure you leave a small amount of the flesh around the outside edge of the watermelon so that the rind doesn’t make your cocktail bitter. 

4. Cut a hole for the spigot.

• Using the watermelon keg tap kit that you purchased (we reviewed and linked 3 of our favorites below), you will want to carve a hole into the bottom part of the watermelon. 
• Use the spigot to measure the hole so that it’s the right size to fit inside and can fit flush against the rind of the watermelon. This is important so that your watermelon keg doesn’t leak.

5. Screw the spigot into place.

• Insert your spigot into the hole you carved in your watermelon and then screw it into place, making it as flush as possible against the rind. 

6. Test the integrity of your seal.

• Pour some water, juice, or other liquid into the watermelon so that it is just above the spigot. Open the tap to test that the liquid flows through and that there are no leaks. 
• If it leaks, pour out the liquid and tighten the back of the spigot more. Test it until there are no leaks. 

7. Fill your watermelon and get partying!

• You can now fill your watermelon with a fancy cocktail, vodka, rum, or whatever mixed drink or alcohol you want. Add some ice (a couple cups should do) and enjoy your party!

The Best Watermelon Keg Tap Kits

Now that you know how to make a watermelon keg, it’s time to choose the best keg tap kit for the job. Check out the three kits below to choose the one that works best for your budget and needs.

Rank	Product	Key Features
1.	Vellax Watermelon Tap Kit	Coring tool, easy to clean
2.	Final Touch Watermelon Keg Tapping Kit	Coring tool, works for pumpkins/pineapples
3.	Blazin Watermelon Tap	Sleek design, brass

1. Vellax Watermelon Tap Kit

Check The Current Price on Amazon

This watermelon tap kit is great because it comes with a coring tool to help you create the perfectly sized hole for the spigot.

That means you’re much less likely to end up with a leaking tap, since the spout will fit perfectly inside the hole. 

You can also use this keg with pumpkins and pineapples so that you can have a festive keg for any holiday party. It’s easy to use and easy to clean, plus it comes with a super affordable price tag.

2. Final Touch Watermelon Keg Tapping Kit

Check The Current Price on Amazon

The Final Touch watermelon keg tap kit comes with a coring tool, too, so that tapping your watermelon couldn’t be any easier.

The hole will be the perfect size for the spigot so that you can pour the perfect cocktail every time. 

Get creative and use it with pineapples and pumpkins for festive holiday cocktails and drinks. It comes with instructions so you’ll always be able to tap your watermelon like a pro. 

3. Blazin Watermelon Tap

Check The Current Price on Amazon

This final watermelon keg tap kit doesn’t come with a coring tool, but we wanted to include it because it is a little more solid and fancy looking than the other taps on this list.

The sleek design makes it a good choice for more upscale events and overall longevity. 

Made from brass instead of plastic, it is much studier and comes with lots of pieces to ensure a tight seal and prevent leaks. it comes with easy step-by-step instructions so you are never more than a few minutes away from tapping the perfect watermelon. 

Watermelon Lemonade Cocktail Recipe

If you want to wow your friends at your next event, then try whipping up this easy and delicious Watermelon Lemonade Cocktail.

You can use rum or vodka depending on which you like better.

Ingredients

• Flesh from one watermelon keg 
• 1-2 lemons, juiced 
• 1/2 cup simple syrup
• 1 quart of vodka or rum, chilled in the freezer for several hours
• ice cubes as needed

Directions

1. Remove the seeds from your watermelon and place the deseeded mixture in a blender or food processor.
2. Add the juice from one lemon and the simple syrup and blend it all together. 
3. Taste the mixture. If you want it tangier, add the juice from a second lemon or a little bit of lime and pulse.
4. Pour the mixture into glasses full of ice or a pitcher and add vodka/rum until it’s to your tastes.
5. Enjoy!

Watermelon Sangria Recipe

If you want to make a batch of delicious watermelon sangria to use in your watermelon keg, follow the recipe below. 

Ingredients

• Flesh from one watermelon keg (about 7 cups or so)
• 750 ml of your favorite white wine- Moscato is a nice choice 
• 1 cup of crisp vodka
• 1/2 a cup of triple sec
• 1 orange, cut into slices
• 1 lime, cut into slices

Directions

1. Remove the seeds from your watermelon and place the flesh in a blender.
2. Blend on a high speed until smooth. 
3. If you want a thicker texture, you can leave the watermelon as is. If you want a thinner sangria, then you can pour the watermelon through a strainer. 
4. In a large bowl or pitcher combine the watermelon puree, white wine, vodka, triple sec, orange slices, and lime slices. 
5. Add a couple of cups of ice cubes to your watermelon keg and fill the rest of the way with your sangria. As you refill, add more ice cubes to keep it chilled.
6. Enjoy!

Do you have any recipes you’ve enjoyed using in your watermelon keg? Let us know in the comments below!

Up Next: Best Rimming Salts And Sugars